Drain Cleaning
Clean Drains Down To The Pipe Wall
Hydro-jetting restores full pipe diameter by removing what accumulated — not just creating a passage through it. Camera verification confirms the result.
0%
Pipe wall cleaning with hydro-jetting
0x
Longer interval vs. snaking alone
0 chemicals
Mechanical cleaning, no caustics
0-visit
Clean, inspect, and document
Cleaning Methods
Six Techniques — One Workflow
High-Pressure Hydro-Jetting
Water at pressure strips scale, grease, and root fragments from the pipe wall. Full-diameter restoration is achieved where a snake only creates a passage.
Rotation Nozzle Root Cutting
Specialised rotation jetting heads cut through root intrusion and flush debris downstream. Effective on all pipe diameters.
Descaling Passes
Mineral scale and calcium buildup in older iron and clay pipes is removed progressively with targeted high-pressure passes.
Post-Clean Camera Verification
After jetting, camera footage confirms the result. You see the clean pipe, not just a reduced blockage.
Grease Line Clearing
Commercial kitchen drain lines require regular jetting to clear FOG accumulation. We schedule recurring cleans to maintain flow.
Combined Inspection and Clean
Camera inspection runs as part of the cleaning visit. If defects are present behind the buildup, we identify them before they cause problems.
Process
Access, Jet, Verify, Report
Access and Initial Camera Pass
We access the line and run a quick camera pass to locate blockages and identify any structural issues before jetting.
- Cleanout access confirmed
- Blockage position and type identified
- Structural issues noted pre-jet
Jetting Pass — Full Line
High-pressure jetting clears the line end to end. Nozzle type is selected for the specific material being removed.
- Nozzle matched to blockage type
- Full-length pass from access to outlet
- Flush confirmed at downstream end
Post-Jet Camera Verification
Camera pass after jetting confirms pipe wall condition and full clearance. Any remaining debris is targeted in a second pass.
- Post-jet footage recorded
- Pipe wall condition noted
- Second pass if required
Report and Maintenance Schedule
You receive a post-clean report with footage and a recommended cleaning interval based on what we found.
- Post-clean footage provided
- Defect report if applicable
- Maintenance interval recommendation
Why Jetting
Why Hydro-Jetting Outperforms Other Methods
Full wall cleaning vs. breakthrough only
Hydro-jetting removes buildup from the pipe wall. Snaking creates a passage through the blockage. The difference in re-accumulation rate is significant.
Extends time between blockages
A properly jetted line takes longer to re-accumulate than one that has only been snaked. Frequency of callouts decreases over time.
No chemicals required
All cleaning is mechanical. No caustic drain products are introduced to your drainage system.
Camera confirmation of result
Post-clean footage shows the pipe condition after jetting. No guessing whether the line is actually clear.
Commercial kitchen drain maintenance
Regular jetting schedules for commercial kitchens prevent grease trap overloads and maintain flow in FOG-heavy environments.
Pairs with camera inspection for full picture
Cleaning and inspection run together. What the clean reveals about the pipe wall informs any follow-on repair recommendations.
Common Questions
Drain Cleaning FAQs
How is hydro-jetting different from a plunger or snake?
How often should drains be cleaned professionally?
Is jetting safe for old clay or cast iron pipes?
Can you clean drains as a preventive measure rather than after a blockage?
Do you clean roof and stormwater drains?
Book a Hydro-Jet Clean
Tell us which drains need attention and we will confirm whether a preventive clean or reactive clearing is the right approach for your situation.